Anchors of Styrofoam

EPS thermal insulation board, also called XPS heat to sheet products such as Styrofoam insulation. Jacketing of these products are made, then bonded with adhesive mortar before treatment to allow the hanging on walls of the styrofoam, styrofoam anchors are fixed to the wall by hammering. EPS and XPS is called the plastic wrapping styrofoam anchor dowel employed in the insulation plate. For example materials such as rockwool plugs they are usually spiked steel dowels. This should be dealt with by a separate title. choice is made by the stuffer thickness dowel our country, 3, 4,5,7 cm to 10 cm is used mainly styrofoam, 12 cm, 14 cm and 16 cm jacketing use of the fixing is common. They are obtained by the injection of the plastic raw materials. Plastic body and a plastic nail. Once inserted into the drill hole with the plastic body being driven into the dowel that point. Settled body into the stud body is prevented from coming out again. Styrofoam thereby allowing for separation from the wall.