FLEX2AK cement and UV stable bicomponent elastomeric Resin Based Waterproofing Liquids 10 + 20 Kg

FLEX2AK Cement and elastomeric Resin Based UV Resistant Two-Component Liquid Waterproofing Materials. White colour.

Cementitious, high UV-cure two component waterproofing product. Roll, applied by brush and spray machines. It is resistant to UV rays and weathering. Concrete, screed strongly adheres to mineral surfaces mosaic and the like. Full-elastic material. Concrete, grout, mosaics and such adheres to mineral surfaces and do not leave time. Especially balconies and terraces, wet, used in the parapet wall and waterproofing concrete roof gutters. Horizontal waterproofing in vertical, above ground, below ground in the collar. Balcony, terrace, toilet, bathroom, shower, kitchen tiles in six waterproofing, and waterproofing of pool and water tanks are made of concrete parapet wall mUşmUş used in roofing and waterproofing creeks.

Application:

The application must be clean, damp places. It must be moistened before application. Oil, grease, paint, rust dirt, such as form oil should be free from surface.

Preparation of mixture: The liquid component (10 kg) into a clean vessel of appropriate size. Under continuous stirring the powder component (20 kg) was added. Stirring is continued until approximately 3 minutes. except that water should be added to the mixture. Low-speed mixer should be used. (400 rev / min)

Two-component insulation is recommended to use the net waterproofing material. cracks can be prevented in this manner and the thickness of insulation occur.

Usage Amount: Min 1.5 kg / m2 should be.