FLEX2AKNO the elastomeric Resin Based Waterproofing Liquids Two-Component 10 + 20 Kg

FLEX2AKNO Resin Cement Based Double Component Liquid Waterproofing and elastomeric material. White colour. UV no contributions. Therefore, under appropriate tiles and ceramics. not suited to the light of day.

Cement-based, two-component waterproofing product. Roll, applied by brush and spray machines. Concrete, screed strongly adheres to mineral surfaces mosaic and the like. Full-elastic material. Concrete, grout, mosaics and such adheres to mineral surfaces and do not leave time. Especially balconies and terraces, wet, used in the parapet wall and waterproofing concrete roof gutters. The horizontal and vertical waterproofing, insulation buried in the water. Balcony, terrace, toilet, bathroom, shower, kitchen tiles in six waterproofing, pool and used the parapet wall in the water tank.

Application:

The application must be clean, damp places. It must be moistened before application. Oil, grease, paint, rust dirt, such as form oil should be free from surface.

Preparation of mixture: The liquid component (10 kg) into a clean vessel of appropriate size. Under continuous stirring the powder component (20 kg) was added. Stirring is continued until approximately 3 minutes. except that water should be added to the mixture. Low-speed mixer should be used. (400 rev / min)

UV resistance and does not contribute. therefore the use of this product will see where direct sunlight is not available. UV resistant to places that this product is suitable FLEX2AK instead of sunlight.

Usage: 1.5 kg per m2 should be Min.